Buy Customized Air Compressor for Laser Cutting Machine
Model | Working Pressure | Air Delivery | Motor Power | Type of Driving | Type of Cooling | Dimension(mm) | Weight (kg) |
Output pipe Diameter |
||||||
psig | bar | cfm | m3/min | kw/hp | L | W | H | |||||||
ERC-10SA | 100 | 7 | 38.8 | 1.1 | 7.5/10 | Belt driven | Air Cooling / Water Cooling |
850 | 640 | 880 | 350 | 3/4″ | ||
116 | 8 | 35.3 | 1 | |||||||||||
145 | 10 | 30.0 | 0.85 | |||||||||||
181 | 12.5 | 24.7 | 0.7 | |||||||||||
ERC-15SA | 100 | 7 | 63.6 | 1.8 | 11/15 | 1150 | 750 | 1180 | 450 | 1″ | ||||
116 | 8 | 58.3 | 1.65 | |||||||||||
145 | 10 | 53.0 | 1.5 | |||||||||||
181 | 12.5 | 45.9 | 1.3 | |||||||||||
ERC-20SA | 100 | 7 | 84.7 | 2.4 | 15/20 | 1150 | 750 | 1180 | 460 | 1″ | ||||
116 | 8 | 77.7 | 2.2 | |||||||||||
145 | 10 | 74.2 | 2.1 | |||||||||||
181 | 12.5 | 63.6 | 1.8 | |||||||||||
ERC-25SA | 100 | 7 | 109.5 | 3.1 | 18.5/25 | 1200 | 880 | 1450 | 620 | 1″ | ||||
116 | 8 | 102.4 | 2.9 | |||||||||||
145 | 10 | 95.3 | 2.7 | |||||||||||
181 | 12.5 | 81.2 | 2.3 | |||||||||||
ERC-30SA | 100 | 7 | 134.2 | 3.8 | 22/30 | 1200 | 880 | 1450 | 640 | 1″ | ||||
116 | 8 | 127.1 | 3.6 | |||||||||||
145 | 10 | 113.0 | 3.2 | |||||||||||
181 | 12.5 | 88.3 | 2.5 | |||||||||||
Motor Efficiency Class: Ultraefficient/IE3/IE2 as per your required Motor Protection Class: IP23/IP54/IP55 or as per your required Certification: CE/ISO9001/TUV/UL/SGS/ASME Voltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok |
we also supply compressor of 14bar /15bar /16bar ,you can refer to customer service for more detail info.
custom air compressor
The problem that the laser cutter can be used to cut thick plates is mainly dependent on the laser power, but has little to do with the compressed air pressure. If the laser power is large enough, the compressed air pressure can be cut at a low level; if the laser power is not large enough The compressed air pressure can not be cut even higher. As long as the laser power is large enough, the higher the compressed air pressure, the better the laser cutting quality and the higher the cutting efficiency. With the development of laser cutting machine power from low power to medium power to high power and super power, the pressure requirements of air compressors for laser cutting machines have increased from the initial 8 bar to 13 bar two years ago. 16bar, and is still moving further towards 20-30bar
Control Panel:
Intelligent microcomputer-based control technology can monitor and control in all aspects the complete machine following your instruction. Remote control realizes unattended operation, and the user-friendly human-machine interface displays instructions and parameters in written form. Also, it can function to self diagnose faults, give warning and automatically regulate the capacity.
Oil filter:
Rotary filters are applied to completely remove the impurities in the lubricating oil, easy to replace and free of oil impregnate.
Cooler:
It is designed for low temperature difference to increase heat exchange area, and ideal to be applied to high-temperature and high-humidity operating environment.
Motor:
First-class motors are adopted, with the level of protection being IP54 and insulation level being F.
Acoustic enclosure:
It is designed into fully-closed mute box, in which sound-absorbing sponge are attached for effective absorption of noise, thereby making the noise 3-5dB(A) lower than that made by the compressors of the same kind. It is reasonably structured overall and very easy to maintain and repair.
custom air compressor.
Reviews
There are no reviews yet.